Publikationen
Autor Titel Typ [ Jahr
]

Filterkriterien: Anfangsbuchstabe Des Nachnamens is F [Alle Filter deaktivieren]
On different modes of a filamentary atmospheric pressure plasma jet: modeling, laser schlieren deflectometric and high-speed camera investigations. The European Physical Journal D. 77 (2023).
Energy flux characterization of atmospheric pressure plasma spray torches with passive thermal probes. Journal of Thermal Spray Technology (2022).
In-situ laser light scattering for temporally and locally resolved studies on nanoparticle trapping in a gas aggregation source. Particle & Particle Systems Characterization. 2200112 (2022).
Energy transfer in interaction of a cold atmospheric pressure plasma jet with substrates. Plasma Sources Science and Technology. 30, 045004 (2021).
Improved long-term stability and reduced humidity effect in gas sensing: SiO2 ultra-thin layered ZnO columnar films. Advanced Materials Technologies. , 2001137 (2021).
An in-flight plasma diagnostic package for spacecraft with electric propulsion. EPJ Techniques and Instrumentation. 8 (2021).
Influence of the nozzle head geometry on the energy flux of an atmospheric pressure plasma jet. EPJ Techniques and Instrumentation. 8 (2021).
Pretreatment of cutting tools by plasma electrolytic polishing (PEP) for enhanced adhesion of hard coatings. Surface and Coatings Technology. 405, 126504 (2021).
Pretreatment of cutting tools by plasma electrolytic polishing (PEP) for enhanced adhesion of hard coatings. Surface and Coatings Technology. 405, 126504 (2021).
Pretreatment of cutting tools by plasma electrolytic polishing (PEP) for enhanced adhesion of hard coatings. Surface and Coatings Technology. 405, 126504 (2021).
Direct calorimetric measurements in a PBII and deposition (PBII&D) experiment with a HiPIMS plasma source. Surface and Coatings Technology. 352, 7 (2018).
Nanoparticle forming reactive plasmas: A multidiagnostic approach. The European Physical Journal D. 72 (2018).
Plasma based formation and deposition of metal and metal oxide nanoparticles using a gas aggregation source. The European Physical Journal D. 72 (2018).
Plasma based formation and deposition of metal and metal oxide nanoparticles using a gas aggregation source. The European Physical Journal D. 72 (2018).
Plasmatechnik 4.0: Stand der Technik, Entwicklungen und Erwartungen. Vakuum in Forschung und Praxis. 30, 34-39 (2018).
Plasmatechnik 4.0: Stand der Technik, Entwicklungen und Erwartungen. Vakuum in Forschung und Praxis. 30, 34-39 (2018).
Plasmatechnik 4.0: Stand der Technik, Entwicklungen und Erwartungen. Vakuum in Forschung und Praxis. 30, 34-39 (2018).
Tunable ion flux density and its impact on AlN thin films deposited in a confocal DC magnetron sputtering system. Surface and Coatings Technology. 348, 159-167 (2018).
Analysis of passive calorimetric probe measurements at high energy influxes. EPJ Techniques and Instrumentation. 4 (2017).
Calorimetric probe measurements for a high voltage pulsed substrate (PBII) in a HiPIMS process. Plasma Sources Science and Technology. 26, 065013 (2017).
Controlled synthesis of germanium nanoparticles by nonthermal plasmas. Applied Physics Letters. 108, 093105 (2016).
Influence of nanoparticle formation on discharge properties in argon-acetylene capacitively coupled radio frequency plasmas. Applied Physics Letters. 108, 063108 (2016).
Modification of a metal nanoparticle beam by a hollow electrode discharge. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. 34, 021301 (2016).
On the synthesis and processing of nanoparticles by plasmas. Problems of Atomic Science and Technology (PAST). 6 (2016).
Characterization of a radio frequency hollow electrode discharge at low gas pressures. Physics of Plasmas. 22, 083513 (2015).
Investigation of a Commercial Atmospheric Pressure Plasma Jet by a Newly Designed Calorimetric Probe. IEEE Transactions on Plasma Science. 43, 1769-1773 (2015).
Versatile particle collection concept for correlation of particle growth and discharge parameters in dusty plasmas. Journal of Physics D: Applied Physics. 48, 055203 (2015).
Calorimetric Probes for Energy Flux Measurements in Process Plasmas. In: Complex Plasmas: Scientific Challenges and Technological Opportunities. Springer International Publishing; 2014. p. 197-234p.
Determination of the Energy Flux of a Commercial Atmospheric-Pressure Plasma Jet for Different Process Gases and Distances Between Nozzle Outlet and Substrate Surface. Contributions to Plasma Physics. 54, 155-161 (2014).
On the Plasma Chemistry of an RF Discharge Containing Aluminium Tri-Isopropoxide Studied by FTIR Spectroscopy. Contributions to Plasma Physics. 54, 170-186 (2014).
Atmosphärendruckplasmen – auch für PlasmaNano Science? Galvanotechnik 103(2012)11. 103, 2510-2513 (2012).
Copper-Capped Carbon Nanocones on Silicon: Plasma-Enabled Growth Control. ACS Applied Materials & Interfaces. 4, 6021-6029 (2012).
Laser schlieren deflectometry for temperature analysis of filamentary non-thermal atmospheric pressure plasma. Review of Scientific Instruments. 83, 103506 (2012).
Mass Spectrometric Investigations of Nano-Size Cluster Ions Produced by High Pressure Magnetron Sputtering. Contributions to Plasma Physics. 52, 881-889 (2012).
Mass Spectrometric Investigations on Aluminum Isopropoxide Containing Plasmas. Plasma Processes and Polymers. 9, 904-910 (2012).
Plasma Chemical Study of a RF Discharge Containing Aluminum Tri-Isopropoxide Using MIR Absorption Spectroscopy Based on External-Cavity Quantum Cascade Lasers. Contributions to Plasma Physics. 52, 864-871 (2012).
Plasma Sheath Structures in Complex Electrode Geometries. Contributions to Plasma Physics. 52, 827-835 (2012).
Towards a Particle Based Simulation of Complex Plasma Driven Nanocomposite Formation. Contributions to Plasma Physics. 52, 890-898 (2012).
Towards a Particle Based Simulation of Complex Plasma Driven Nanocomposite Formation. Contributions to Plasma Physics. 52, 890-898 (2012).
Determination of sheath parameters by test particles upon local electrode bias and plasma switching. The European Physical Journal D. 63, 431-440 (2011).
Metal/polymer nanocomposite thin films prepared by plasma polymerization and high pressure magnetron sputtering. Surface and Coatings Technology. 205, S38-S41 (2011).
The method of conventional calorimetric probes — A short review and application for the characterization of nanocluster sources. Surface and Coatings Technology. 205, S388-S392 (2011).
Comparative Study of the Carbonisation of CoTMPP by Low Temperature Plasma and Heat Treatment. Plasma Processes and Polymers. 7, 515-526 (2010).
Modification of polyethylene powder with an organic precursor in a spiral conveyor by hollow cathode glow discharge. The European Physical Journal D. 58, 305-310 (2010).
Particles as probes for complex plasmas in front of biased surfaces. New Journal of Physics. 11, 013041 (2009).
Towards a Microscopic Theory of Particle Charging. Contributions to Plasma Physics. 49, 303-315 (2009).
Surface States and the Charge of a Dust Particle in a Plasma. Physical Review Letters. 101 (2008).
Complex (dusty) plasmas: Examples for applications and observation of magnetron-induced phenomena. Pure and Applied Chemistry. 77 (2005).
Electrocatalysts for Oxygen Reduction Prepared by Plasma Treatment of Carbon-Supported Cobalt Tetramethoxyphenylporphyrin. Journal of The Electrochemical Society. 152, A2179 (2005).
Gezielte Manipulation von Mikropartikeln in einem Plasma. Manipulation of micro-disperse particles in a process plasma. Vakuum in Forschung und Praxis. 17, 259-261 (2005).
Ion Molecule and Dust Particle Formation in Ar/CH4, Ar/C2H2 and Ar/C3H6 Radio-frequency Plasmas. Contributions to Plasma Physics. 45, 378-384 (2005).
Rotating dust ring in an RF discharge coupled with a dc-magnetron sputter source. Experiment and simulation. Journal of Physics D: Applied Physics. 37, 2703-2708 (2004).